Product Overview
A 55kVA generator can support a broader commercial or light-industrial emergency load group while remaining compact enough for many plant rooms and outdoor enclosures. Correct phase balance and motor-starting analysis are central at this size.
Dianbida Power checks the supply voltage, acceptable voltage dip, duty classification and site conditions before confirming the set. Transfer equipment, cable termination and protection settings are developed with the facility's electrical design.
Reference Configuration
The following items define the inquiry configuration. Final component data and performance values are confirmed in the approved project datasheet; unspecified choices are not implied by the product title.
|
Parameter |
Configuration Basis |
|
Nominal apparent power |
55 kVA title configuration |
|
Active power |
According to approved power factor and duty |
|
Phase |
Three phase typical; final design confirmed |
|
Voltage and frequency |
Matched to facility distribution |
|
Breaker |
Selected for rated current and coordination |
|
Transfer |
Manual or automatic system interface |
|
Enclosure |
Indoor open set or outdoor acoustic canopy |
|
Options |
Remote monitoring, heaters and extended fuel system |
Facility Interface at 55 kVA
- Balance single-phase branch loads across the three-phase generator.
- Coordinate breaker trips with downstream protective devices.
- Check elevator, pump, HVAC and compressor starting one by one.
- Confirm cable entry, terminal orientation and maintenance clearance.
Commercial and Industrial Coverage
- Warehouses with lighting, doors and selected handling equipment.
- Office and retail buildings with essential HVAC zones.
- Manufacturing cells requiring safe shutdown or limited continued production.
- Water-treatment and pumping facilities with staged motors.
Coordinate with the Main Switchboard
- Provide the single-line diagram and emergency-load schedule.
- List phase allocation and the largest motor start.
- State transfer mode and acceptable outage duration.
- Define room ventilation or outdoor enclosure requirements.
- Approve breaker, neutral and cable-termination details.
Product and Component Images
Factory Assembly and Technical Confirmation
Dianbida Power Equipment (Jiangsu) Co., Ltd. manufactures and integrates generator sets with project-selected controls, enclosures and auxiliary systems. Clear technical confirmation before production helps avoid mismatched voltage, duty, access or interface details at the site.
Frequently Asked Questions
Q: What kW corresponds to 55 kVA?
A: Use the active-power figure in the approved datasheet because it depends on power factor and rating definition.
Q: Can it start an elevator?
A: The lift drive, starting method, regenerative behavior and other simultaneous loads must be reviewed.
Q: Is an ATS included?
A: It can be supplied or interfaced when current, pole arrangement and transfer logic are specified.
Q: Can it be installed indoors?
A: Yes, with engineered cooling air, exhaust, fuel, fire protection and maintenance access.
For a 55kVA Generator proposal, send the connected-load list, required duty, voltage, frequency, phase, site conditions, enclosure preference, control interface and fuel-runtime target. Dianbida Power will return a project-specific configuration for technical approval before quotation or production.
Request a Dianbida Configuration Review
Hot Tags: 55kva generator, China 55kva generator manufacturers, suppliers, factory, Containerized Emergency Diesel Generator, Data Center Emergency Backup Diesel Generator, Hospital High Output Diesel Generator, Hospital Power System Diesel Generator, Industrial 50kVA Diesel Generator, Remote Monitoring Emergency Diesel Generator
